Igniter from Book Matches

Procedure

1. Remove the staple(s) from match book and separate matches from cover.

2. Fold and tape one row of matches.

3.Shape the cover into a tube with striking surface on the inside and tape. Make sure the folded cover will fit tightly around the taped match heads. Leave cover open at opposite end for insertion of the matches.

4.Push the taped matches into the tube until the bottom ends are exposed about 3/4 in. (2 cm).

5. Flatten and fold the open end of the tube to that it laps over about 1 in. (2-1/2 cm); tape in place.

Use With Molotov Cocktail

Tape the “match end tab” of the igniter to the neck of the molotov cocktail.

Grasp the “cover end tab” and pull sharply or quickly to ignite.

General Use

The book match igniter can be used by itself to ignite flammable liquids, fuse cords and similar items requiring hot ignition.

CAUTION

Store matches and completed igniters in mois- tureproof containers such as rubber or plastic bags until ready for use. Damp or wet paper book matches will not ignite.